Home > News > Industry News

Excavator parts should be cleaned regularly


Mastering good excavation technology is an important condition to protect excavation technicians. In addition, we also need excavation technicians to regularly clean excavator accessories to ensure that the excavator can be in a good operating condition.
1. Clean the crankcase regularly. During the operation of the engine, the oxides of unburned gas, acid, moisture, sulfur and nitrogen enter the crankcase through the gap between the piston ring and the cylinder wall, and mix with the metal powder produced by the wear of the parts to form sludge. When the amount is small, it is suspended in the oil, and when the amount is large, it is precipitated from the oil, blocking the filter and oil hole, causing difficulty in engine lubrication and causing wear.

2. Regularly clean the fuel system. When the fuel is supplied to the combustion chamber through the oil circuit, it will inevitably form colloid and carbon deposits, which will deposit in the oil passage, fuel injector and combustion chamber, interfere with the flow of fuel, destroy the normal air-fuel ratio, and make the fuel oil. Poor atomization, resulting in engine wheezing, knocking, idling instability, poor acceleration and other performance problems.

3. Regular maintenance of the water tank. Rusting and scaling of the engine water tank is a common problem. Rust and scale can restrict the flow of coolant in the cooling system, reduce heat dissipation, cause the engine to overheat, and even cause engine damage.

Excavator technicians need to clean excavator accessories regularly. This step is simple but very important. It is one thing that every excavator technician must follow. Many excavator technicians are very confident in their own operations, so they are careless at work, which may lead to the possibility of accidents, so I hope that every employee should take their quota work seriously and be dutiful.